Alireza Sarmadian

Alireza Sarmadian
PhD, CEng, AFHEA, Thermal Engineer

About

As a Chartered Engineer and Postdoctoral Research Associate at King's College London, I am part of an EPSRC-funded Prosperity Partnership with Jaguar Land Rover (JLR) on vehicle electrification. My background includes work as a Research Fellow and Chancellor's Award-winning PhD student at the University of Sussex, where I worked on an EPSRC-funded project in collaboration with Ford, Ricardo, and Denso researching the use of an evaporative spray cooling system for cooling automotive electrical and electronic powertrain components.
My expertise lies in thermal engineering, specifically in the implementation of advanced thermal management systems for automotive and aerospace applications. I am passionate about research and development work on zero-emission vehicles, and intend to continue my research in this field. I also have a keen interest in using environmentally-friendly coolants in my cooling system designs to protect our natural environment.
I am looking to develop my career in an engineering environment, whether it be in industry or academia through research fellowship and lecturership opportunities. I am always open to new opportunities, and welcome any discussions regarding potential collaborations or projects.

RESEARCH INTERESTS

  • Heat and mass transfer
  • Thermal Management
  • Refrigeration
  • Cooling Systems
  • Li-ion Batteries
  • Applied Thermal Engineering
  • Two phase flow
  • Spray
  • Temperature Control
  • Cryogenics
  • Flow visualisation
  • Lab-on-a-chip devices
  • MEMS and Microfluidics

EDUCATION

Sep 2018 - 2021

University of Sussex, Brighton, UK
PhD in Engineering, Chancellor’s international research scholar

Aug 2016

University of Tehran, Tehran, Iran
MSc in Aerospace engineering

Aug 2014

Shahid Bahonar University of Kerman, Iran
BSc in Mechanical Engineering

RESEARCH EXPERIENCE

May 2021 - August 2021

University of Sussex - DCVR Group, Brighton, UK
Research Fellow

  • This was a 3-month post of Research Fellow in the Department of Engineering and Design to work on a novel resonating free-piston generator concept. The post focuses on control engineering development to manage key mechanical and electrical machine functions of the generator.

Sep. 2018 - August 2021

University of Sussex - DCVR Group, Brighton, UK
Researcher

  • Research on an EPSRC-funded project: “Thermal management of an evaprative spray cooling system for ICEs and automotive electrical and electronic powertrain components” under the supervision of Professor Julian Dunne.

Nov. 2016 - Mar. 2018

University of Tehran - Faculty of New Sciences and Technologies, Tehran, Iran
Researcher

  • Research on “Condensation Heat Transfer, Pressure Drop, and Flow visualization Characteristics of R-600a in Horizontal Smooth and Helically Dimpled Tubes” under the supervision of Dr. Maziyar Shafaee and Dr. S.G. Mohseni.
  • Research on “Design and manufacturing of a closed-loop refrigeration test rig for microchannels and heat pipes”.

Apr. 2016 - Oct. 2016

Pishran Novin Aseman, Tehran, Iran
Researcher

  • Conduct research on “Modelling, design, and manufacturing of industrial solenoid valves” at Hydraulic Valve Design and Manufacturing centre.

PUBLICATIONS
&
PRESENTATIONS

  • Sarmadian, A, Dunne, J. F., Long, C. A., Thalackottore-Jose, J., Pirault, J-P (2021). Correlation models of critical heat flux and associated temperature for spray evaporative cooling of vibrating surfaces. International Journal of Heat and Mass Transfer, 179, 121735.
  • Thalackottore-Jose, J., Sarmadian, A, Dunne, J. F., Long, C. A., Pirault, J-P, Rouaud, Cedric (2021). An experimentally-verified temperature control simulation model for spray evaporative cooling of vibrating powertrain parts. International Journal of Heat and Mass Transfer, 170, 121041.
  • Sarmadian, A., Moghaddam, H. A., Asnaashari, A., Joushani, H. A. N., Moosavi, M, Islam, M. S., Saha, S. C., Shafaee, M. (2020). Flow boiling heat transfer and pressure drop characteristics of Isobutane in horizontal channels with twisted tapes. International Journal of Refrigeration, 162, 120345.
  • Sarmadian, A, Dunne, J. F., Long, C. A., Pirault, J-P, Thalackottore-Jose, J., Rouaud, Cedric (2020). Heat flux correlation models for spray evaporative cooling of vibrating surfaces in the nucleate boiling region. International Journal of Heat and Mass Transfer, 160, 120159.
  • Sarmadian, A, Dunne, J. F., Long, C. A., Pirault, J-P, Thalackottore-Jose, J., Rouaud, Cedric (2020). The effect of surface vibration on spray evaporative cooling. Proceedings of the 7th International Conference on Fluid Flow, Heat and Mass Transfer.
  • Moghaddam, H. A., Sarmadian, A., Asnaashari, A., Joushani, H. A. N., Islam, M. S., Saha, S. C., Shafaee, M. (2020). Condensation heat transfer and pressure drop characteristics of Isobutane in horizontal channels with twisted tape inserts. International Journal of Refrigeration.
  • Moghaddam, H. A., Sarmadian, A., Shafaee, M., Enayatollahi, H. (2020). Flow pattern maps, pressure drop and performance assessment of horizontal tubes with coiled wire inserts during condensation of R-600a. International Journal of Heat and Mass Transfer, 119062.
  • Alimardani, F., Moghaddam, H. A., Sarmadian, A., Shafaee, M. (2019). Pressure loss and performance assessment of horizontal spiral coil inserted pipes during forced convective evaporation of R-600a. International Journal of Refrigeration, 107, 20-30.
  • Moghaddam, H. A., Sarmadian, A., Shafaee, M. (2019). An experimental study on condensation heat transfer characteristics of R-600a in tubes with coiled wire inserts. Applied Thermal Engineering, 113889.
  • Mashouf, H., Shafaee, M., Sarmadian, A., Mohseni, S. G. (2017). Visual study of flow patterns during evaporation and condensation of R-600a inside horizontal smooth and helically dimpled tubes. Applied Thermal Engineering, 124, 1392-1400.
  • Sarmadian, A., Shafaee, M., Mashouf, H., Mohseni, S. G. (2017). Condensation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes. Experimental Thermal and Fluid Science, 86, 54-62.
  • Shafaee, M., Mashouf, H., Sarmadian, A., Mohseni, S. G. (2016). Evaporation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes. Applied Thermal Engineering, 107, 28-36.

Awards
&
Patents

  • Chancellor’s International Research Scholarship (CIRS) 2018; Doctoral School, University of Sussex, Falmer House, Brighton BN1 9QF, United Kingdom
  • Sarmadian, Alireza; Mashouf, Hooman; Shafaee, Maziyar. 2017. Helically Dimpled Enhanced Heat Transfer Tube. Iran Intellectual Property Office, Patent 91320, filed June 5, 2016, and issued February 18, 2017.

TEACHING EXPERIENCE

Sep. 2018 - present

University of Sussex, Brighton, UK
Doctoral Tutor

  • Assisted Dr Esra Sorguven in “Computational Fluid Dynamics” module, lab sessions. (2021)
  • Assisted Dr Yevgen Petrov in “Finite Element Analysis” module, lab sessions. (2021)
  • Assisted Dr Rodrigo Aviles-Espinosa in “Smart Interactive Systems” module, LabVIEW based lab sessions. (2021)
  • Assisted Dr Giovanni Contreras Garcia in “Design for Manufacture for Product Design” module, lab sessions. (20-21)
  • Assisted Dr Alaa Hussein in “Control Engineering” module, lab and practical sessions. (20-21)
  • Assisted Dr Dmitrijs Dmitrenko in “Programming for Engineers” module (Graduate), workshop sessions. (20-21)
  • Assisted Dr Kun Liang in “Programming for Engineers” module (Undergrad), labs and workshops. (20-21)
  • Assisted Dr. Kun Liang for CAD, and Dr. Yevgen Petrov for FEA in “Computer Aided Design and Modelling” module, ran weekly lab sessions. (2020)
  • Assisted Dr. Bao Kha Nguyen in “Systems Analysis and Control” module, ran weekly workshop sessions. (2020)
  • Assisted Mr. Harri Koivisto in “Thermal power cycles” module, ran weekly Jet Engine lab sessions. (2020)
  • Assisted Dr. Esra Sorguven in “Engineering Thermodynamics” module, ran weekly three workshop sessions, and 2 weeks labs. (2020)
  • Assisted Dr. Carole Becker in “Engineering Maths” module, ran weekly three workshop sessions. (2019)
  • Assisted Dr. Alaa Hussein in “Control Engineering” module, ran weekly lab and practical sessions. (2019)
  • Assisted Dr. Arash Dizqah and Prof Peter Fussey in “Engine Technology” module, ran weekly lab sessions. (2019)
  • Assisted Dr. Ronald Grau in “Programming for Engineers” module (Graduate), ran weekly workshop sessions. (2019)
  • Assisted Dr. Kun Liang in “Programming for Engineers” module (Undergrad), ran weekly lab sessions. (2019)
  • Assisted Dr. William Wang in “Engineering Thermodynamics” module, ran weekly lab sessions. (2019)

Spring 2015

Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran
Teaching Assistant

  • Assisted Dr. Roham Rafiee in “Advanced Maths” module (Graduate).

SKILLS

Courses

  • Starting to Teach | Associate Fellow of the Higher Education Academy (AFHEA)
  • Piping (PDMS) and Welding (MIG, TIG, and STICK)
  • CFD (Finite Difference and Finite Volume)
  • Working Safely | A course approved and validated by the Institution of Occupational Safety and Health (Crawley College)
  • Emergency First Aid At Work (RFQ)- Including Management of Catastrophic Bleeding| QA Level 3 (Posturite Ltd)
  • Risk Assessment Training | Univerisy of Sussex
  • LabVIEW Core 1 | NI customer Education

Softwares

  • EES (Engineering Equation Solver)
  • LabVIEW
  • REFPROP | NIST
  • Ansys (APDL, Fluent and ICEM)
  • COMSOL
  • SimScale
  • STAR-CCM+

Programming Language

  • LabVIEW (FPGA)
  • MATLAB
  • Fortran
  • C/C++

Operating Systems

  • Macintosh
  • Windows
  • iOS

LANGUAGES

  • English: Advenced
  • Farsi: Native

MEMBERSHIP and SERVICE

Mar. 2021 - present

CEng MIMechE
Institution of Mechanical Engineers

Nov. 2019 - present

Elsevier
Reviewer

  • International Journal of Heat and Mass Transfer

LEISURE ACTIVITIES

  • Reading
  • Listening to Music
  • Physical Fitness
  • Swimming
  • Basketball